FUJITSU 2000 - Manual (Page 49)

35
• External Cache
Choose Enabled or Disabled. This option enables the level 2 cache memory.
• CPU L2 Cache ECC Checking
Choose Enabled or Disabled. This option enables the level 2 cache memory
ECC(error check correction).
• Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the
computer. If this is set to Enabled, BIOS will shorten or skip some check items
during POST.
Enabled Enable quick POST
Disabled(default) Normal POST
• First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items. The settings are Floppy, LS/ZIP, HDD-0/
HDD-1/HDD-2/HDD-3, SCSI, CDROM, LAN, and Disabled.
• Swap Floppy Drive
Switches the floppy disk drives between being designated as A and B. Default
is Disabled.
• Boot Up Floppy Seek
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80
tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
• Boot Up NumLock Status
The default value is On.
• Gate A20 Option
On (default) Keypad is numeric keys.
Off Keypad is arrow keys.
Normal The A20 signal is controlled by keyboard controller or
chipset hardware.
Fast(default) The A20 signal is controlled by por t 92 or chipset
specific method.
She_Chp2_28-52 19/1/00, 16:28 35