FUJITSU 2000 - Manual (Page 28)

14
1.7 HARDWARE INSTALLATION
1.7.1 CENTRAL PROCESSING UNIT: CPU
The mainboard operates with Intel ® Celeron TM processor. The mainboard uses a
CPU socket called Socket 370 for easy CPU installation. The CPUshould always
have a Heat Sink and a cooling fan attached to prevent overheating.
1.7.2 CPU INSTALLATION PROCEDURES
1. Pull the lever sideways away from the
socket. Then, raise the lever up to a
90-degree angle.
2. Locate Pin 1 in the socket and look for
the white dot or cut edge in the CPU.
Match Pin 1 with the white dot/cut
edge. Then, inser t the CPU. It should
inser t easily.
3. Press the lever down to complete the
installation.
CPU
CPU
Open Lever
Pin 1
Sliding
Plate
White dot/
Cut edge
Close
Lever
Pin 1
She_Chp1_12-17 19/1/00, 16:28 14