FUJITSU 2000 - Manual (Page 35)

21
1.9.1 POWER SAVING LED CONNECTOR: JGL1
JGL1 can be connected with an LED. There are two types of LED that you can use:
3-pin LED or 2-pin LED(ACPI request). When the 2-pin LED is connected to JGL1,
the light will turn green, when system is On. During sleep mode, the 2-pin LED will
change color from Green to Orange. For 3-pin LED, when LED is connected to JGL1,
this will light when the system is On and blinks when it is in suspend/sleep mode.
3-pin LED 2-pin LED
1-2 Single Color 1-2 Dual Color
1-3 Blink
1 3
Green Color
Orange
Color
1 3
Green Color
Orange
Color
JGL1
+
1 3
She_Chp1_18-27 19/1/00, 16:28 21