FUJITSU 2000 - Manual (Page 47)

33
• PrimaryMaster/PrimarySlave
SecondaryMaster/Secondary Slave
Press PgUp/<+> or PgDn/<-> to select Manual, None, Auto type. Note that the
specifications of your drive must match with the drive table. The hard disk will
not work properly if you enter improper information for this categor y. If your
hard disk drive type is not matched or listed, you can use Manual to define your
own drive type manually.
If you select Manual, related information is asked to be entered to the
following items. Enter the information directly from the keyboard. This
information should be provided in the documentation from your hard disk
vendor or the system manufacturer.
If the controller of HDD inter face is SCSI, the selection shall be
“None”.
If the controller of HDD inter face is CD-ROM, the selection shall be
“None”.
Access Mode Access mode
Cylinder number of cylinders
Head number of heads
Precomp write precom
Landing Zone landing zone
Sector number of sectors
She_Chp2_28-52 19/1/00, 16:28 33