FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 326)

12 Importing and exporting server profiles
DHCPUsage
Yes
In the case of an iSCSI boot, the system tries to obtain the
name of the iSCSI target, the IP address of the iSCSI target,
the IP port number, and the SCSI LUN ID from a DHCP server
in the network.
No
You must specify a static name for the iSCSI target, a static IP
address for the iSCSI target, a static IP port number, and a stat-
ic SCSI LUN ID.
Name
Only when DHCPUsage is No
The IQN name of the iSCSI target.
IPv4Address
Only when DHCPUsage is No
The IP address of the iSCSI target.
PortNumber
Optional; only if DHCPUsage is No
TCP port number (default: 3260 for iSCSI).
BootLUN
Only when DHCPUsage is No
The LUN ID of the boot disk on the SCSI target
AuthenticationMethod
None
No authentication is used.
326 ServerView Virtual-IO Manager