FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 186)

5 Virtual-IO Manager user interface
Add another network
Network Name
meaningful name of the network.
VLAN Id
The unique VLAN number of the network specified above. The VLAN ID
must be assigned uniquely within a shared uplink set.
Native VLAN
Defines a network as native VLAN. All packages that do not contain a
VLAN ID will be allowed through this connection.
Service VLAN
Defines a network as service VLAN.
Isolate mode
You activate the isolate mode via Isolate mode. With isolate mode acti-
vated, server blades in the same chassis that use the same network can-
not communicate with each other, but only with an external device
though the uplinks.
This checkbox is not shown if the connection blade does not support iso-
late mode.
Add button
Adds the virtual LAN network to the table below.
Table
You can also define a network as a native VLAN or service VLAN and set the
isolate mode in the table retrospectively:
Native VLAN
Select the checkbox in the corresponding row under Native VLAN in the
table to define a network as a native VLAN.
186 ServerView Virtual-IO Manager