FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 146)

5 Virtual-IO Manager user interface
l
Fault State
l
State Causes
The (Causes or State Causes) state cause is not at all a fault. It is simply a
state marker. The following values are defined:
Cause Significance
data base doesn't match
hardware Configuration of switch/server does not match
with database.
not supported Switch/server model is not supported.
model does not match
slot configuration The model is supported, but some other require-
ments are not met.
slot is empty No hardware plugged, although a configuration
exists.
profile assigned Switch/server is used by an assigned server pro-
file.
no configuration No configuration of switch/server is stored
inside the database.
no ServerView entry No entry of blade server inside of ServerView
Operations Manager.
different switches in fab-
ric The switch is incompatible with another switch
in the same fabric.
inapplicable profile
assigned The assigned server profile is incompatible with
the plugged blade server.
stacking error The switch configuration is not compatible with
the stacking groups.
Depending on what you select, the following buttons are available, that allow
you to carry out various actions.
Manage
Activates the management of the selected servers. The Authentication
dialog box opens. In this dialog box, you enter the user names and
146 ServerView Virtual-IO Manager