FUJITSU ServerView Virtual-IO Manager V3.1 - Manual (Page 124)

4 Configuration
You configure the network parameters of an I/O connection blade as follows:
l
Activate the Enable DHCP option under Management Port Settings if
the connection blade is to receive its IP address from a DHCP server. If
this option is not activated, you must specify the IP address, subnet
mask, and the gateway address.
l
Click Apply to activate the settings.
Configuration using the Remote Manager
You can also configure the network parameters of the I/O connection blades
using the Remote Manager of the management blade.
124 ServerView Virtual-IO Manager