Furuno GP-3300 - Manual (Page 19)

1-8
1.11 Card Drives, Chart Cards
Card drives
Two card drives are behind the card drive door: the upper slot is for
memory cards which store display data (waypoints, tracks, and marks),
and the lower slot is for digitized chart cards.
Displaying an electronic chart with the power
turned on
Follow the procedure below to display an electronic chart with the
power turned on.
1. Open the card slot door.
Figure 1-10 Opening card slot door
2. Insert chart card label side up in the lower slot.
This side up.
FURUNO
Card NAVIONICS
Card
Figure 1-11 Inserting chart card
3. Close the card slot door.
4. Press [ZOOM IN] or [ZOOM OUT] key to display chart.