Furuno GP-3300 - Manual (Page 107)

11-10
2. Select WAYPOINT from the MODE field.
3. Enter start and stop waypoints by using arrow keys and numeric
keys.
4. Press the [ENT] key. The calculation results appear on the menu.
11.8 Locking Preferred Settings
The GD/GP-3300 provides various methods for entering and select-
ing destination waypoint, waypoint and other items. Once you find
the method you prefer you may want to lock it to have it automati-
cally selected. This section shows how to do this.
When you lock settings the following functions are not available:
• Selection of method to enter waypoint, destination waypoint, route,
and perform range and bearing calculation
• Chart correction (menu 6)
• Memory apportion (menu 7)
• Initial settings (menu 8)
• Self test (menu 9-9)
Locking or unlocking preferred settings
While pressing and holding down the [MENU] key, turn on the power.
Release the [MENU] key when the plot display (or video pilot dis-
play) appears.
11.9 Memory Capacity
The default memory arrangement is as shown in Figure 11-14.
Track
4000 pts
Mark/Line/
External Event
Mark
4000 pts
Waypoints
99 pts
Route
Points
150 pts
External Waypoint 1 pt
+
Figure 11-14 Default memory arrangement