Furuno GP-3300 - Manual (Page 103)

11-6
Correcting chart position by latitude and
longitude
You can correct chart position by manually entering latitude and lon-
gitude corrections.
1. Press the [MENU] key followed by the [6] key to display the
CORRECT POSITION screen.
6 CORRECT POSITION
POS CORR = YES NO
MODE = CURSOR L/L L/L
LATITUDE =
− − ° − −
.
− − −
’N ( . ’N)
LONGITUDE =
− − − ° − −
.
− − −
’E ( . ’E)
SET CORRECT L/L POSITION THROUGH KEYBOARD
AND PRESS ENT TO DISPLAY L/L.
PRESS ENT AGAIN TO REGISTER. + : N, E
−
: S, W
Figure 11-8 CORRECT POSITION menu
2. Select YES from the POS CORR field.
3. Select L/L from the MODE field.
4. Enter latitude and longitude corrections in the LATITUDE and
LONGITUDE fields.
5. Press the [ENT] key to display
∆
L/L.
6. Press the [ENT] key again to register.
Corrections chart position by
∆
(Delta) L/L
Follow the procedure below to correct chart position by Delta L/L.
1. Press the [MENU] key followed by the [6] key to display the
CORRECT POSITION screen.
6 CORRECT POSITION
POS CORR = YES NO
MODE = CURSOR L/L L/L
DELTA LAT =
− − ° − −
.
− − −
’N
DELTA LONG =
− − ° − −
.
− − −
’E
ENTER L/L CORRECTION VALUE THROUGH KEYBOARD.
+ : N, E
−
: S, W
Figure 11-9 CORRECT POSITION menu