1 physical interface, 1 interface signals – FUJITSU MHK2090AT User Manual
Page 75
Interface
5-2
C141-E088-03EN
5.1 Physical Interface
5.1.1 Interface signals
Figure 5.1 shows the interface signals.
INTRQ:
INTERRUPT REQUEST
IOCS16-: 16-BIT I/O
PDIAG:
PASSED DIAGNOSTICS
DASP-:
DEVICE ACTIVE/SLAVE PRESENT
DIOW-: I/O WRITE
STOP:
STOP DURING ULTRA DMA DATA BURSTS
DIOR-:
I/O READ
HDMARDY: DMA READY DURING ULTRA DMA DATA IN BURSTS
HSTROBE: DATA STROBE DURING ULTRA DMA DATA OUT BURSTS
IORDY:
I/O READY
DDMARDY: DMA READY DURING ULTRA DMA DATA OUT BURSTS
DSTROBE: DATA STROBE DURING ULTRA DMA DATA IN BURSTS
Figure 5.1 Interface signals
DMARQ: DMA REQUEST
INTRQ: INTERRUPT REQUEST
MSTR: Master
ENCSEL: ENABLE CSEL
PDIAG-: PASSED DIAGNOSTICS
CBLID-: CABLE TYPE IDENTIFIER
DASP-: DEVICE ACTIVE/SLAVE PRESENT