FUJITSU MHK2090AT User Manual
Page 109

Interface
5-36
C141-E088-03EN
Table 5.4 Information to be read by IDENTIFY DEVICE command (5 of 8)
Bit 0 = 1 Mode 3
*9 WORD 80
Bit 15-6:
Reserved
Bit 5:
ATA/ATAPI-5 supported = 1
Bit 4:
ATA/ATAPI-4 supported = 1
Bit 3:
ATA-3 supported = 1
Bit 2:
ATA-2 supported = 1
Bit 1-0:
Undefined
*10 WORD 82
Bit 15:
Undefined
Bit 14:
'1' = Supports the NOP command.
Bit 13:
'1' = Supports the READ BUFFER command.
Bit 12:
'1' = Supports the WRITE BUFFER command.
Bit 11:
Undefined
Bit 10:
'1' = Supports the Host Protected Area feature set.
Bit 9:
'1' = Supports the DEVICE RESET command.
Bit 8:
'1' = Supports the SERVICE interrupt.
Bit 7:
'1' = Supports the release interrupt.
Bit 6:
'1' = Supports the read cache function.
Bit 5:
'1' = Supports the write cache function.
Bit 4:
'1' = Supports the PACKET command feature set.
Bit 3:
'1' = Supports the power management feature set.
Bit 2:
'1' = Supports the Removable Media feature set.
Bit 1:
'1' = Supports the Security Mode feature set.
Bit 0:
'1' = Supports the SMART feature set.
*11 WORD 83
Bits 15-7: Undefined
Bit 6:
'1' = When the power is turned on, spin is started by the SET
FEATURES sub-command.