FUJITSU MHK2090AT - Manual (Page 21)

Contents
xvi C141-E088-03EN
Table 3.2 Cable connector specifications 3-10
Table 4.1 Self-calibration execution timechart 4-9
Table 4.2 Write precompensation algorithm 4-10
Table 5.1 Signal assignment on the interface connector 5-3
Table 5.2 I/O registers 5-7
Table 5.3 Command code and parameters 5-14
Table 5.4 Information to be read by IDENTIFY DEVICE command 5-
32
Table 5.5 Features register values and settable modes 5-40
Table 5.6 Diagnostic code 5-47
Table 5.7 Features Register values (subcommands) and functions 5-58
Table 5.8 Format of device attribute value data 5-62
Table 5.9 Format of insurance failure threshold value data 5-62
Table 5.10 SMART error log data format 5-66
Table 5.11 SMART self test log data format 5-68
Table 5.12 Contents of security password 5-70
Table 5.13 Contents of SECURITY SET PASSWORD data 5-74
Table 5.14 Relationship between combination of Identifier and Security
level, and operation of the lock function 5-74
Table 5.15 Command code and parameters 5-77
Table 5.16 Parallel generation equation of CRC polynomial 5-99
Table 5.17 Recommended series termination for Ultra DMA 5-100
Table 5.18 Ultra DMA data burst timing requirements 5-105
Table 6.1 Default parameters 6-7