2 system configuration, 1 ata interface, 2 1 drive connection – FUJITSU MHK2090AT User Manual

Page 35: 3 2 drives connection

Device Configuration

2-4

C141-E088-03EN

2.2 System Configuration

2.2.1 ATA interface

Figures 2.3 and 2.4 show the ATA interface system configuration. The drive has
a 44-pin PC AT interface connector and supports the PIO transfer at 16.6 MB/s
(ATA-3, Mode 4), the DMA transfer at 16.6 MB/s (ATA-3, Multiword Mode 2)
and also the U-DMA at 66.6 MB/s (ATA-3, Mode 4).

2.2.2 1 drive connection

MHC2032AT
MHC2040AT

Figure 2.3 1 drive system configuration

2.2.3 2 drives connection

MHC2032AT
MHC2040AT

(Host adaptor)

Note:

When the drive that is not conformed to ATA is connected to the disk drive above
configuration, the operation is not guaranteed.

Figure 2.4 2 drives configuration

MHG2102AT
MHH2064AT
MHH2032AT

MHJ2181AT
MHK2120AT
MHK2090AT
MHK2060AT

This manual is related to the following products:

MHJ2181AT MHK2120AT MHK2060AT