FUJITSU MHV2160BT - Manual (Page 193)

5.3 Host Commands
C141-E239 5-117
*29 WORD 128
Bits 15-9: Reserved
Bit 8: Security level. 0: High, 1: Maximum
Bits 7-6: Reserved
Bit 5: '1' = Enhanced security erase supported
Bit 4: '1' = Security counter expired
Bit 3: '1' = Security frozen
Bit 2: '1' = Security locked
Bit 1: '1' = Security enabled
Bit 0: '1' = Security supported
*30 WORD 206: Support of SCT command set
Bits 15-6: Reserved
Bit 5: '1' = SCT Data Table (AC5) Supported
Bit 4: '1' = Features Control cmd (AC4) Supported
Bit 3: '1' = Error Recovery Control (AC3) Supported
Bit 2: '1' = LBA Segment Access (AC2) Supported
Bit 1: '1' = Long Sector Access (AC1) Supported
Bit 0: '1' = SCT command set Supported (includes SCT status)
*31 WORD 210-211: T.B.D. (T13 Proposal)
Verify sector number display when Write Read Verify mode 3 is selected by
SET FEATURES command
Value: 0x0000 0400 to 0x0004 0000 sectors
When Mode 3 has not been selected, it is 0x0000 0000.
*32 WORD 212-213: T.B.D. (T13 Proposal)
Verify sector number display when Write Read Verify mode 2 is selected by
SET FEATURES command
Value: 0x0001 0000 sectors