FUJITSU MHV2160BT - Manual (Page 191)

5.3 Host Commands
C141-E239 5-115
Bit 8: '1' = From the SET MAX SET PASSWORD command
Bits 7-6: Same definition as WORD 83.
Bit 5: '1' = Enables the Power-Up In Standby function.
Bit 4: '1' = Enables the Removable Media Status Notification function.
Bit 3: '1' = Enables the Advanced Power Management function.
Bits 2-0: Same definition as WORD 83.
*21 WORD 87
Bit 15: = 0 The device always returns the fixed value indicated on the left.
Bit 14: = 1 The device always returns the fixed value indicated on the left.
Bits 13-0: Same definition as WORD 84.
*22 WORD 88
Bits 15-8: Currently used Ultra DMA transfer mode
Bit 14: '1' = Mode 6 is selected.
Bit 13: '1' = Mode 5 is selected.
Bit 12: '1' = Mode 4 is selected.
Bit 11: '1' = Mode 3 is selected.
Bit 10: '1' = Mode 2 is selected.
Bit 9: '1' = Mode 1 is selected.
Bit 8: '1' = Mode 0 is selected.
Bits 7-0: Supportable Ultra DMA transfer mode
Bit 6: '1' = Supports the Mode 6
Bit 5: '1' = Supports the Mode 5
Bit 4: '1' = Supports the Mode 4
Bit 3: '1' = Supports the Mode 3
Bit 2: '1' = Supports the Mode 2
Bit 1: '1' = Supports the Mode 1
Bit 0: '1' = Supports the Mode 0
*23 WORD 89
MHV2160BT= X'50': 160 minutes