FUJITSU Image Scanner fi-5220C - Manual (Page 8)

fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
PREFACE (2)
1 2
Screen Examples In This Manual
The screen examples in this manual are subject to change without notice in the interest of product improvement. If the
actual displayed screen differs from the screen examples in this manual, operate by following the actual displayed screen
while referring to the User's Manual of the scanner application you are using. The screenshots in this manual were
captured from the FUJITSU TWAIN32 scanner driver, ScandAll 21 Image Capturing Utility Software, FUJITSU ISIS scanner
driver, QuickScan
™ image capturing software and Adobe ® Acrobat ® .
Warning Label
The following picture shows the warning label used in this scanner.
High Temperature
The glass surface inside the ADF
becomes hot during the operation. Be
careful not to touch the glass surface
inside the ADF.
ATTENTION
Do NOT remove from the scanner, stain or scratch the warning labels.
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or an authorized FUJITSU Image Scanner service provider to have
repairs done on this product.
1 2
All Rights Reserved Copyright 2006-2009 © PFU LIMITED