FUJITSU Image Scanner fi-5220C - Manual (Page 144)

fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
7.2 Document Quality (1)
1 2
Document Type
The following paper types are recommended for document use:
●
Woodfree paper
●
Wood containing paper
When using documents of paper type other than the above, check whether or not the document can be scanned by test-
scanning a few sheets before executing the actual document.
Document Thickness
Paper thickness is expressed by "paper weight." The following shows the paper weights that can be used on this scanner:
●
52 g/m 2 `127 g/m 2
Only paper weight of 127 g/m2 is acceptable for A8-size documents.
Precautions
The following documents may not be scanned successfully:
●
Documents of non-uniform thickness (e.g. envelopes and documents with photographs attached)
●
Wrinkled or curled documents (See HINT below.)
●
Folded or torn documents
●
Tracing paper
●
Coated paper
●
Carbon paper
●
Carbonless paper
●
Photosensitive paper
●
Perforated or punched documents
●
Documents that are not square or rectangular
●
Very thin documents
●
Photographs
Do not use the following documents:
●
Paper-clipped or stapled documents
●
Documents on which the ink is still wet
●
Documents smaller than A8 (Portrait) in size
●
Documents wider than A4 or Letter size (216mm)
●
Documents other than paper such as fabric, metal foil, or transparencies
HINT
●
When scanning semi-transparent documents, slide the [Brightness] bar to light to avoid bleed
through.
●
To prevent the rollers from becoming dirty, avoid scanning documents containing large areas
written or filled in pencil. If scanning of such documents is unavoidable, clean the rollers frequently.
ATTENTION