FUJITSU Image Scanner fi-5220C - Manual (Page 119)

fi-5120C / fi-5220C Image Scanner Operator
Guide
TROUBLE SHOOTING
CONTENTS MAP
TOP
6.2 Error Indications in the Operator Panel (2)
1 2
Device alarms:
Indication Meaning Remedy
E0 Flatbed motor malfunction.
When you encounter any alarm on the
display, turn
the scanner off and on. If the alarm is
still displayed
on the Function Number display, contact
the store
where you purchased the scanner or an
authorized
FUJITSU scanner service provider.
E1 Trouble in the optical system (Flatbed).
E2 Trouble in the optical system (front).
E3 Trouble in the optical system (back).
E4 The motorfs fuse has blown out.
E6 Trouble in the operator panel.
E7 Trouble occurred in the EEPROM.
E8 The SCSI interface fuse has blown out.
E9 An error in the image memory.
EA Trouble with the imprinter.
Ec An alarm in the memory.
Ed Trouble with the SCSI interface controller.
EF
Trouble with the background switching
mechanism.
1 2
All Rights Reserved Copyright 2006-2009 © PFU LIMITED