FUJITSU SCANPARTNER 600C - Manual (Page 87)

4-59
4.8 Status Transition of Logical Unit
Power ON
Reset
BUS DEVICE RESET message
Other command
INQUIRY command REQUEST SENSE command
UNIT ATTENTION reported/cleared
Range protected in reserved status
NOT READY status
Other command
REQUEST SENSE
COMMAND
(NOT READY reported)
Normal status
Other command
READ command
Scan completed
C.A. status
- Hardware error
- Abnormal command
- Abnormal parameter
- Medium error
REQUEST SENSE command Other command
(Error detail reported/cleared) (C.A. status released)
GOOD status
CHECK CONDITION status
Status transition
UNIT ATTENTION status
Time to READY
At room temperature
(25
§C):
≤
30 seconds
At low temperature
(5
§C):
≤
3 minutes
NOT READY status
READY status: Waiting
Reading under way
C.A status