FUJITSU SCANPARTNER 600C - Manual (Page 27)

3-15
3.7.2 Cleaning inside the ADF
Clean the ADF according to the procedure that follows when the following situations frequently occur:
•
Documents are not fed smoothly.
•
Several documents are fed in at the same time.
•
Reading result is poor.
Cleaning Procedure:
1. Push the ADF cover release button, and open the ADF module.
2. Figure 3.10 shows the locations of pad, scrub roller, feeding rollers and follow rollers, and ADF
calibration white sheet.
Figure 3-10
3. Use a clean and soft cloth moistened with a non-corrosive solvent like ALCOHOL (with purity
above 99.5%) and wipe them slightly.