FUJITSU SCANPARTNER 600C - Manual (Page 51)

4-23
7 6 5 4 3 2 1 0
Operation code X'12'
Logical unit number (Reserved) EVPD
Page Code
(Reserved)
Allocation length
Control byte
(a) EVPD (enable vital product data): Byte 1
This scanner does not support EVPD. If this bit is set to 1, the scanner returns the following error:
•
Status key: B'OOOO1 '(CHECK CONDITION)
•
Sense key: X'5'(ILLEGAL REQUEST)
(b) Page code: Byte 2
This scanner does not support page code. If this bit is set to 1, the scanner returns the following error:
•
Status key: B'00001'(CHECK CONDITION)
•
Sense key: x'5'(ILLEGAL REQUEST)
(C)Allocation length: Byte 4
This field specifies the storage area in bytes that the initiator allocates for inquiry data. If a 0 is set here,
inquiry data is not transferred, but this
is not regarded as an error. The target terminates the DATA IN
phase when it has transferred either the bytes of inquiry data specified in this field or all of effective
inquiry data.
Byte 0
1
2
3
4
5