beautypg.com

FUJITSU SCANPARTNER 600C User Manual

Page 24

background image

3-12

3.6.2.2 Placing the documents on the ADF paper chute

Perform the following steps to place the document in the ADF paper chute. If these steps are not followed
closely, a feed error may occur.

Figure 3-8 Placing the document on the ADF paper chute

1. Place the document upside-down.
2. Angle the document sheets as shown. (See "Angling the document sheets" that follows for an

explanation of this procedure.)

3. Spread open the right and left guides of the ADF paper chute, and set them approximately 5 mm wider

than the document width.