Set the #3 and #4 function keys as follows, Control head, Installation of video plotter kit – Furuno RP-250 User Manual
Page 60: Ais data ais menu

9. INSTALLATION OF VIDEO PLOTTER KIT
54
20. Set the #3 and #4 function keys as follows:
a) Press [RADAR MENU], [0], [0] and [5].
b) Press [2] to choose OPERATION and then press the [ENTER] key.
c) Rotate the trackball to choose AIS DATA and then press the [ENTER] key.
d) Press [1] and [6].
e) Press [2] to choose OPERATION and then press the [ENTER] key.
f) Rotate the trackball to choose AIS MENU and then press the [ENTER] key.
g) Press the [RADAR MENU] key to close the menu.
21. Attach the keytop labels (supplied) to the control head as below.
BRILLIANCE
A/C RAIN
A/C SE
RANGE
OFF
ON
EBL
ON
OFF
ANTENNA
PM
TUNE
DEGAUSS ERROR
#1
#2
POWER
AIS
DATA
AIS
MENU
Control head
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1600F (97 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)