Furuno RP-250 - Manual (Page 33)

27
6 OTHER PLOTTER FUNCTIONS
6.1 Initial Settings
An item on the PLOTTER DISP SELECT menu can be deleted through the
VIDEO PLOTTER INITIAL SETTING menu. To restore the item reselect it on
the
[PLOTTER DISP SELECT] menu, following paragraph 1.6.1.
Note: Normally, the VIDEO PLOTTER INITIAL SETTING menu is not
displayed. To display it, press the [RADAR MENU] key five times while
pressing and holding down the [1] key.
1. Press the [NAV MENU] key.
2. Press the [0] key twice to display the VIDEO PLOTTER INITIAL SETTING
menu.
[VIDEO PLOTTER INITIAL SETTING]
1 [VIDEO PLOTTER(2)]
2 DANGER HIGHLIGHT
OFF/ON
3 COAST LINE
OFF/ON
4 LAND DENSITY
OFF/ON
5 PLACE NAME
OFF/ON
6 MARK
OFF/ON
7 OWN SHIP PLOT
OFF/ON
8 TARGET PLOT
OFF/ON
9 CONTOUR LINE
OFF/ON
0 GRID
OFF/ON
VIDEO PLOTTER, INITIAL SETTING menu
3. Press appropriate numeric key to turn item on or off as appropriate.
4. Press the [ENTER] key.
5. Repeat steps 3 and 4 to set other items.
6. Press the [NAV MENU] key to close the menu.