Furuno RP-250 - Manual (Page 27)

4. WAYPOINTS, NAV LINE
21
4.5.2 Adding waypoints to navigation lines
To add waypoints to a navigation line, do the following:
1. Press the [NAV MENU], [4] and [5] keys.
2. Press the [2] key. Enter navigation line number and then press the [ENTER]
key twice.
3. Press the [8] key.
4. Enter “FROM” waypoint number and then press the [ENTER] key.
5. Enter waypoint number to add and press the [ENTER] key.
8 ADDING
WPT00 -> 00
9 ...
"From" waypoint
Newly added waypoint
Add waypoint screen
6. Press the [NAV MENU] key to close the menu.
4.5.3 Removing waypoints from navigation lines
1. Press the [NAV MENU], [4] and [5] keys.
2. Press the [2] key, enter navigation line number and then press the [ENTER]
key twice.
3. Press the [9] key, enter waypoint number and then press the [ENTER] key.
4. Press the [NAV MENU] key to close the menu.
4.5.4 Nav line list
1. Press the [NAV MENU], [4] and [6] keys to display the list.
2. Press the [NAV MENU] key to close the menu.
4.5.5 Deleting individual navigation lines
1. Press the [NAV MENU], [4], [6] and [9] keys.
2. Enter navigation line number you want to delete. (The line in use is not
deleted.)
3. Press the [ENTER] key.
4. Press the [NAV MENU] key to close the menu.
4.5.6 Deleting all navigation lines
1. Press the [NAV MENU] and [9] keys.
2. Press the [6] key twice to choose ALL.
3. Press the [ENTER] key.
4. Press the [NAV MENU] key to close the menu.