Furuno RP-250 - Manual (Page 43)

7. AIS OPERATION
37
3. Press appropriate numeric key among 2-5 to choose the type of message
you want to see. The example below shows a safety related message
(addressed).
[MESSAGE]
1 [AIS1]
2 SAFETY RELATED MESSAGE
(ADDRESSED)
3 SAFETY RELATED MESSAGE
(BROADCAST)
4 BINARY MESSAGE
(ADDRESSED)
5 BINARY MESSAGE
(BROADCAST)
6 AUTO DISPLAY OFF/ON
=========================
SAFETY MESSAGE (OWN SHIP)
SOURCE ID:
012343215
DEST. ID:
045673289
DATE: ****/**/**
TIME: 10:32:41
MESSAGE
STORM WARNING VICINITY
OF 35
° N 135 ° W.
Ship sending message
Ship receiving message
Date of message (D/M/Y)
Time of message
Text of message
Message type
1
1
1
1
Safety related message
4. Key is same number entered at step 3.
5. Press any menu key to close the message display.
7.7.2 Automatically displaying messages
You can automatically display a message when it is received.
1. Press the [AIS MENU] key to display the AIS menu.
2. Press the [6] key ([MESSAGE]) to show the MESSAGE menu.
3. Press the [6] key (AUTO DISPLAY) once or twice to choose ON.
4. Press the [ENTER] key.
5. Press the any menu key to close the menu.
When a message is received the “message” display is automatically opened,
showing the received message. To close the display, press any key.