LEICA M11 Monochrom Rangefinder Camera - Manual (Page 90)

PRACTICAL DEFAULT SETTINGS ▸ AUXILIARY DISPLAYS 90
SENSITIVITY
The sensitivity can be additionally adjusted. This setting will apply for
all info profiles.
Factory setting:
High
▸ Select Capture Assistants in the main menu
▸ Select a profile
▸ Select Focus Peaking
▸ Select Sensitivity
▸ Select the desired setting
( Low , High )
Note
• Focus peaking is based on subject contrast, i.e. differences be-
tween light and dark. As a result, high contrast subject elements
could be marked, even if they are not completely in focus.
LEVEL GAUGE
The integrated sensors of the camera show its orientation. These in-
dicators ensure exact camera orientation along the longitudinal and
transverse axes of critical objects, e.g. architecture.
Deviations in relation to the longitudinal axis (i.e. when the camera
is tilted up or down in the direction of view) are indicated by a short
line in the center of the image ( 1 ). Deviations in relation to the trans-
verse axis (when the camera is tilted to the left or right) are indicated
by two long lines to the left and right of the image center ( 2 ).
2
1
Note
• The camera will switch the aspect of the level gauge autonomously
for shoots in vertical format.