LEICA M11 Monochrom Rangefinder Camera - Manual (Page 65)

BASIC CAMERA SETTINGS ▸ POWER SAVE MODE (STANDBY MODE) 65
TIME
▸ Select Camera Settings in the main menu
▸ Select Date & Time
▸ Select Time Setting
▸ Select the desired brightness
( 12 Hours , 24 Hours )
▸ Set the time
(Select am or pm for the 12-hour format)
TIME ZONE
▸ Select Camera Settings in the main menu
▸ Select Date & Time
▸ Select Time Zone
▸ Select your time zone/current location
– The Greenwich Mean Time offset is shown on the left of the line
– Major cities in the relevant time zones are shown on the right
DAYLIGHT SAVING TIME
▸ Select Camera Settings in the main menu
▸ Select Date & Time
▸ Select Daylight Saving Time
▸ Select On / Off
POWER SAVE MODE (STANDBY MODE)
You can choose one of two power saving functions.
– Standby mode is activated after 30 s/1 min/2 min/5 min/10 min/
30 min/60 min
– Automatic LCD panel shutdown
CAMERA STANDBY
The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
Factory setting:
2 min
▸ Select Camera Settings in the main menu
▸ Select Power saving mode
▸ Select Camera Standby
▸ Select the desired setting
( Aus , 30 s , 1 min , 2 min , 5 min , 10 min , 30 min , 60 min )
DISPLAY STANDBY
Factory setting: 30 s
▸ Select Camera Settings in the main menu
▸ Select Power saving mode
▸ Select Display Standby
▸ Select the desired setting
( 30 s , 1 min , 5 min )
Notes
• The camera can be woken from standby mode at any time by
pressing the shutter button or by switching the main switch off
and on again.
• This setting will also affect the EVF of an attached Leica Visoflex 2
(see p. 68) accessory.