LEICA M11 Monochrom Rangefinder Camera - Manual (Page 68)

BASIC CAMERA SETTINGS ▸ LCD PANEL/VIEWFINDER SETTINGS 68
LEICA VISOFLEX 2 (EVF)*
An electronic viewfinder (EVF) can be attached to the Leica M11
Monochrom via its accessory shoe. Leica Visoflex 2 is an optional
extra and offers the following functions:
– Swivel function for easy photography with various angles
– Applying screen settings
– Diopter compensation
Important
All mentions of “EVF” or “Electronic Viewfinder” in this manual
refer to the optional accessory Leica Visoflex 2 .
Using the older “Leica Visoflex” model with the Leica M11 Mono-
chrom can – as a worst case scenario – result in irreparable
damage to the camera and/or the Visoflex. Please contact Leica
Customer Care if in doubt.
The settings described below will only take effect if Leica Visoflex is
attached.
* Visoflex was developed specifically for the M10 series, and is not compatible
with Leica M11 Monochrom. The newly developed Visoflex 2, on the other hand,
can also be used with some Leica M10 series models.
LCD PANEL/EVF USE
The electric viewfinder can take on a variety screen of functions. The
displays appearing on screen and in the electronic viewfinder are
identical.
You can preset the types of situations in which the EVF or the LCD
panel should show the displays.
Factory setting:
Auto
EVF LCD panel
Auto The eye sensor in the Visoflex automatically toggles
the camera between LCD panel and EVF.
• Shooting
• Review
• Menu control
LCD • Shooting
• Review
• Menu control
EVF • Shooting
• Review
• Menu control
EVF
extended
Only EVF is used for shooting mode. The eye sensor
in the Visoflex automatically toggles the camera
between LCD panel and EVF for review and menu
control.
• Shooting
• Review
• Menu control