LEICA M11 Monochrom Rangefinder Camera - Manual (Page 163)

FAQ 163
The camera switches off again immediately
after it is switched on
Battery is depleted Charge or replace the battery
Camera does not recognize the memory card The memory card is not compatible or defective Replace the memory card
Memory card is incorrectly formatted Format the memory card in the camera
Menus and displays
Electronic viewfinder is dark EVF brightness is set too low Set the EVF brightness
Display language is not English - Select English in the Language menu
The LCD panel is to dark or too bright/not
clear
The brightness setting is incorrect Adjust the display brightness
Viewing angle is too small View the LCD panel at a perpendicular angle
Brightness sensor is blocked Make sure that the brightness sensor is not blocked
Favorites menu does not appear The favorites menu is empty Add at least one function
The brightness in Live View mode is not the
same as in the images
The brightness settings for the LCD panel have no
influence over the exposures
Adjust the brightness settings as needed
Exposure Simulation is deactivated Activate the function
The number of remaining shots does not count
down after shooting
The image requires only very little memory space This is not a fault; the number of remaining shots is
calculated as approximations
Desired shutter speed cannot be set The working range of the set shutter type is undercut/
surpassed
Select a different setting via Shutter Type
The set ISO value prevents very slow shutter speeds Select a different ISO value
Focus peaking does not appear automatically
during focusing
The function Focus Peaking is now independent of
the Focus Aid function
Display Focus Peaking alongside the other auxiliary
displays
Shutter speeds cannot be set in the status
screen
The shutter-speed dial is set to a fixed shutter speed or to
A (aperture priority)
Set the shutter-speed dial to B
ISO value cannot be set in the status screen The ISO dial is set to a fixed ISO value or to A (Auto ISO) Set the ISO dial to M