LEICA M11 Monochrom Rangefinder Camera - Manual (Page 128)

PHOTOGRAPHY ▸ FLASH PHOTOGRAPHY 128
FLASH RANGE
The usable flash range depends on the aperture and sensitivity val-
ues set manually or calculated by the camera. It is important to en-
sure that the subject is within the relevant flash range for sufficient
illumination. A permanent setting to the shortest available shutter
speed for flash mode (sync time) may often result in unnecessary
underexposure of those subject elements that are not lit sufficiently
by the flash.
This camera allows the fine tuning of the shutter speed used in flash
mode in combination with aperture priority depending on the condi-
tions of the object or your own pictorial composition ideas.
Factory setting:
1/f s
▸ Select Flash Settings in the main menu
▸ Select Shutter Speed Limit (Flash)
▸ Select the desired value
( 1/(4f) s , 1/(2f) s , 1/f s , 1/250 s , 1/125 s , 1/60 s , 1/30 s ,
1/15 s , 1/8 s , 1/4 s , 1/2 s )
Note
• The menu item Shutter Speed Limit (Flash) in submenu Flash
Settings is identical to the menu item of the same name in sub-
menu Auto ISO Settings . A setting in one menu will affect the
other.
FLASH EXPOSURE COMPENSATION
This function can be used to selectively reduce or enhance flash
exposure regardless of ambient light, e.g. to brighten the face of a
person in the foreground when taking a photo outdoors in the eve-
ning while retaining the same general lighting mood.
Factory setting:
0 EV
▸ Select Flash Settings in the main menu
▸ Select Flash Exp. Compensation
• The submenu displays a scale with a red setting mark. The
function is deactivated if the value is set to 0 .
▸ Set the value on the scale
• The set value is displayed above the scale.