InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 92)

www.infocus.com
Maintenance and cleaning
92
Precautions on lamp operation
Your projector employs high voltage lamp, which requires careful and correct
operation.
Fail to do so may lead to accidents, personal injuries, or fire.
• Life cycle of lamp varies with environment it is in service. Life cycle of lamp varies.
That is, some lamps may last longer than their counterparts.
• If your projector prompts you to replace lamp (by showing a lamp replacing icon)
then replace it with a new one after powering it off and it is fully cooled down.
(Please replace lamp by strictly following steps given in this manual.)
If you keep on using the lamp after being prompted to replace it then you are
exposed to greater risks of lamp explosion.
• Lamp may explode due to external impact and shock. Risks of explosion vary
with projector and use environment and status of the lamp.
In case of lamp explosion, take the following safety measures:
Disconnect your projector from power source immediately in case of lamp
explosion. Call authorized service centre to inspect your projector and replace
lamp. Make a thorough inspection to ensure every piece of debris after explosion
has been removed. Remove every piece of debris after explosion. No one else
may inspect the internal of your projector except those authorized and well trained
technician who also are familiar with its maintenance. Or we shall not be held liable
for the consequences.