InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 90)

www.infocus.com
Maintenance and cleaning
90
Note
Reset the filter counter after its
cleaning or replacement.
Reset the filter counter
1. Press MENU button and the OSD displays.
Press  button to select Expand menu,
press  button or OK.
2. Press  button to select "Filter Counter",
press  button or OK. Press  button
to select “Filter counter reset” and press
OK. The “Reset filter counter?” message
displays. Select Yes to proceed.
3. In another pop-up dialogue box, select Yes
to reset the filter counter.
Recommendations
Please do not use your projector at place
of dust and smoke. This may affects image
quality. Using your projector in place of dust
and smoke may lead to piling dusts on lens,
LCD panel, and lens components within it. In
case like this, call your dealer or service centre
for correct cleaning.
Lamp replacement
The lamp warning icon displays when its
usage time are more than the life of the
projector minus 300H and less than the life of
the projector.
The lamp replacement icon displays when
its usage time are more than the life of the
projector.
Lamp model
Your projector’s lamp is a consumable. You
can confirm your usage time according to
"Light source counter" on the Info. menu in
page 73.
You'd better ask a professional technician to
replace the lamp. contact your dealer for help.
Please call your dealer to replace the lamp.
Recommendations
DO NOT replace the lamp when it is so hot.
Make sure to replace it at lease 1hour later
after using it.
The internal cover of lamp model is getting hot
in use. Take care, or you may get burned.
Expand
Filter counter
0H
200H
On
Filter counter
Filter counter reset
Filter check
Timer
The lamp model
The lamp warning icon
The lamp replacement icon
Lamp replacement