InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 57)

www.infocus.com
Setting
57
Note
• HDMI option can be chosen
only in HDMI 1 and HDMI 2
channel.
HDMI setup
When the external device is connected to the
HDMI terminal of the projector, and the images
can not be projected normally, please switch
on the Image or Sound setting.
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press  button to select the setting
menu, then press or  button to enter
the sub-menu.
1. Press  button to select [ HDMI setup ]
menu.
2. Press button.
• Display [ HDMI setup ] instantly.
3. Press  button to select [ Image ] or
[ Sound ].
• Press button.
Image
[64-940]
When external device (such as: a blu ray disc player) is connected to
the HDMI setup terminal.
[0-1023]
When the output of an external device (such as a computer), via a
conversion cable or a similar cable, is connected to the HDMI setup
terminal.
Select this option when the output of the pc or any other device is
connected to the HDMI setup terminal also.
Sound
[HDMI]
When connect to the HDMI cable to transmit images and audio while
the users do not need connect to audio signal separately.
[Computer]
When the output of an external device (such as a computer), via a
conversion cable or a similar cable, is connected to the HDMI terminal.
The audio signal would be output according the connection of AUDIO
IN terminal.
HDMI EQ setup
Mode 0-3
Change the HDMI reception level according to the AV device
connected to the HDMI input terminal. If noise appears in the image or
the image does not appear, change the settings.
Direct power on
Light source mode
...
Setting
Standby mode
High land
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Off
Eco
Off
Normal
Off
On
HDMI Setup