InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 7)

www.infocus.com
Safety operation guideline
7
Safety operation guideline
Safety instructions
This document and your projector employ certain symbols to illustrate how to use
your projector safely. They are described below: Please get yourself familiar with them
before going through this document.
Caution
Ignoring messages indicated by this symbol may lead to personal
injuries or deaths.
Note
Ignoring messages indicated by this symbol may lead to personal
injuries or property damage.
High voltage inside with risks of electric shock.
RG2
RG2.DO NOT stare into the beam.
Please read this manual carefully before installing and operating your
projector.
Your projector comes with a number of convenient features and functions. You may
make the most of these features and keep your projector in good working conditions
by using it correctly. Invalid operation of your projector may not only shorten its life
cycle but also may lead to product failure, fire, or other incidents.
In case of any operation abnormality, refer to this manual to check your operation
and connections and try solutions given in the “Troubleshooting” section at end of
this manual. If the problem persists, call your dealer or our service centres which are
listed at the back of this manual.
Your projector’s lamp is a consumable and will get dimmer after long-term use. It’s
normal for an older lamp to be dimmer than a newer one. Please power on and off your
projector by strictly following steps given in “Power on your projector” and “Power
off your projector” section of this manual. Execute regular maintenance and cleaning
according to instructions set forth in “Maintaining and cleaning your projector” section
of this manual. Fail to do so may shorten life cycle of your projector and its lamps
sharply or even damage your projector and its lamps before long.