InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 66)

www.infocus.com
Expand
66
The [ Enter Password ] screen
will appear when the projector
is on. If you want to change the
PIN code lock or password (for
three digits), you must enter the
password. The factory default
password is "111".
Reset password
To change the password protection, press
button, and the PIN Code change pop-
up dialogue box prompts.
• Press arrow  button to select a number,
then press button to enter it and
move the cursor.
• The number you typed is displayed as “*”.
To edit number you have entered, press
menu button to move the cursor to the
number you want to change, press 
button to select the correct one.
• Repeat this step to type in a 3-digit number.
• Enter a three-digit number, move the cursor
to "set". Press the button, you can
start to operate the projector.
• If the password is invalid, the password
displayed as “ *** ” will be in red. Please try
again with a valid one.
PIN Code Change
You may change the PIN Code to any 3-digit
number you like.
• Press OK key to select PIN Code change.
• The PIN Code change dialogue box
prompts, press arrow  button to give a
valid new code.
• The New PIN Code dialogue box prompts.
Set up a new PIN Code, check contents
contained in the dialogue box, select set
and the new password is set now.
• Please remember your new password and
keep it safe. You cannot change the PIN
Code again if you forgot the password you
have set.
On
Note
• After changing the PIN Code
to a new number, please
remember it and keep it safe
The PIN Code cannot be
changed again if the new
password is lost or forgotten.
Expand
Security
Off PIN code lock
PIN code change
Security submenu