Network, Expand, Network menu network – InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector User Manual
Page 70: Preparation, Operation steps

www.infocus.com
Expand
70
7C:6F:F8:4E:B9:2F
192.168.1.100
Expand
Network
Network setting
Network information
MAC address:
IP address
Network menu
Network
This function is designed to allow the
computer control on the projector remotely
over your local network.
Preparation
1. Required equipment: Projector, computer,
network cable
2. Connection:
Connect your projector to a router or switch
in the LAN with normal or jumper network
cable. In case a normal network cable failed
to connect successfully, use a jumper cable
instead.
3. Turn on the computer. The LAN port on
computer and projector are flashing after
power on the projector.
Operation steps
1. Power on your projector.
2. Acquire the IP address, with DHCP set to
on and auto IP allocation set to On. (You
may set DHCP to Off and set up IP address
manually if you are somehow familiar with
networking.)
3. Enter the network setup menu
1. Press