InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 73)

www.infocus.com
Info.
73
Info.
Select Info. function to detect the projected
image signal and the projector operating
status.
Menu operation
Press < Info. > button on the remote control
or < MENU > button on the control panel to
display the OSD menu. Press  button to
select the info. menu, then press or 
button.
Info. display as follows:
Display selected input source.
Display H-sync. Freq. of input
signal in unit of KHz.
Show “---KHz” when no signals
are in existence.
Display V-sync. Freq of input
signal in unit of KHz.
Show “---KHz” when no signals
are in existence.
Display the lamp's usage time.
Display selected power
management mode.
Display selected image mode.
Display the projector's model
name.
Display the projector's serial
number.
Display the projector's firmware
version.
Input
H-sync. freq
V-sync. freq
Light source
counter
Power
management
Image mode
Model Name
S/N
Firmware
Version
Info.
Input
V-sync freq.
H-sync freq.
Light source counter
Image mode
Model Name
S/N
VGA1
...
... KHZ
... HZ
Standard
Power management Off
5 H
xxxxx
xxxxx
Firmware Version 1.00.010