InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 85)

www.infocus.com
Useful function
85
The termination of Memory Viewer
1. Press  button to select , displayed in the left corner of the screen.
2. Press button.
3. Unplug the USB memory directly.
Note
• When you insert a USB memory, please make sure insertion direction to avoid
damaging the port.
• Please note the following points when inserting and removing USB memory:
a. The indicator flashes,when the USB memory insert into the projector or the
projector is reading data, do not remove the USB memory When the light is
flashing.
b. If you use a USB memory device without lights, the projector will not recognize
when reading data. Please close its browse function on and turn off the
projector, then remove the USB memory.
c. Do not install and remove USB memory frequently. Then remove it after the
installation of at least 5 seconds. After removing at least five seconds and
then reinstall it. The projector is on switch mode during the operation when
installing or removing the USB memory.
Precautions on processing and storage of USB memory
• Please do not place the USB memory or the lid where children can reach. Swallow
USB memory or the lid may cause choking.
• If smoke or produce abnormal smell, close the external device and contact the
dealer.
• Do not let the water, chemicals or oil into the USB memory, or it may cause a
short circuit or fire.
• Do NOT put foreign matter or metal items in the USB port. Static electricity may
cause data loss or data damage.
• When USB memory is read or written, Do not remove USB memory from the
computer or projector /otherwise it may result in data loss or corruption of data.
• Please do not put the USB memory in high temperature, damp or dusty place, or
next to magnetic materials.
Note
• Insertion or removal of the USB memory may be performed when the projector is
in any power status.