InFocus IN1026 Advanced 4200-Lumen WXGA 3LCD Projector - Manual (Page 17)

www.infocus.com
Name and function of your projector
17
1 Mono (L/R) terminal
A Mono audio signal (A single audio
terminal) should be connected to the
AUDIO (R / L) interface.
2 AUDIO OUT terminal
Connect external audio devices to this
terminal.
3 COMPUTER IN
Connect RGB to this terminal.
4 HDMI1, HDMI2 connector
Connect HDMI1 digital output signals
or HDMI2 digital output signals to these
terminals.
5 USB-B connector
When using the "USB display" function,
connect your computer to this terminal
via the USB cable.
6 USB-A connector
When using the Memory Viewer function,
insert the USB stick or HDD directly to
this terminal.
Terminals
7 VIDEO IN terminal
Connect video output signal to this
terminal.
8 AUDIO IN terminal
Connect audio signal of the PC to this
terminal.
9 MONITOR OUT terminal
For monitor output, output the signal
from to other monitors.
10 RS-232C
When using the RS232 functional to
operate the projector, connect the serial
communication to this terminal.
11 IR (rear)
Receives the remote control IR signal.
12 LAN terminal
Connect a RJ45 cable to this terminal
when using network control to operate
your projector.
• For IN1029, IN1039, IN1049, IN1059, IN1024,
IN1034, IN1044, IN1026, IN1036, IN1046
3 2
1
10 9 8 7 11 12
5 4 6