Change unit date and time, Change unit date and time -6 – Quintum Technologies Tenor DX User Manual
Page 94
9-6
P/N 480-0049-00-10
Chapter 9: Diagnostics/Maintenance
Change Unit Date and Time
You can change the unit’s date and time via Command Line Interface (CLI) as follows:
1. Access the CLI through a Telnet session. See Chapter 5: Getting Started: Command Line Interface (CLI)
for more information.
2. Access the Config module.
3. Type date followed by mm/dd/yy/hh:mm:ss and press Enter.
4. For example, type config# date 06/14/02/22:14:00. This command will set the current time to June 14,
2002 at 10:14 p.m.