Quintum Technologies Tenor DX - Manual (Page 32)

2-8 P/N 480-0049-00-10
Chapter 2: Hardware Components
RJ-45 Ethernet Cable (10/100)
An RJ-45 (10/100BaseT) straight through shielded cable is used to connect Tenor DX to an Ethernet LAN.
Cable pinouts are listed in Table 2-5. Color specifications are applicable to the RJ-45 cable provided.
Figure 2-6 RJ-45 (10/100BT) Connector Pinouts
Table 2-5 RJ-45 (10/100BT) Connector Pinouts
Pin # Signal Definition Color
1 TX + Transmit Data White w/orange
2 TX - Transmit Data Orange
3 RX + Receive Data White w/green
4 Unused Unused Blue
5 Unused Unused White w/blue
6 RX - Receive Data Green
7 Unused Unused White w/Brown
8 Unused Unused Brown
Pin # Connects to Pin #
1
2
3
4
5
6
7
8 1
2
3
4
5
6
7
8