Quintum Technologies Tenor DX - Manual (Page 67)

6-8 P/N 480-0049-00-10
Chapter 6: Working with SNMP
Launching Command Line Interface (CLI) from HP Openview
Launch Command Line Interface with pop-up menu as follows:
1. From the HP Openview desktop, right-click on the desired Tenor DX unit icon and select Quintum Digital.
The CLI will launch with the IP address of the unit associated with that icon (the correct IP address will
appear in the URL).
2. Configure the unit.
OR
Launch CLI by double-clicking the icon as follows:
1. From the HP Openview desktop, double-click on the desired Tenor DX unit icon and select Quintum Dig-
ital.
The CLI will launch with the IP address of the unit associated with that icon (the correct IP address will
appear in the URL).
2. Configure the unit as defined in Chapter 4: Getting Started: Tenor Configuration Manager/Tenor Monitor.
Set up Tenor DX status polling
The following explains how to configure HPOV to determine and display unit status if the Tenor DX is not
configured to send traps. Polling is only intended for Tenor DX units which are not accessible to configure the
network manager IP address using the Tenor DX ’s Command Line Interface (CLI). We do not recommend
polling more than ten Tenor DX units.
1. From the HP Openview desktop, right-click on the desired Tenor DX unit icon and select Object Proper-
ties.
2. From the Attributes window, select Quintum Tenor DX attributes.
3. Click on Edit Attributes.
4. Select Turn on Tenor Status Polling (the toggle allows you to set to True or False). Select True.
5. Click on Verify. After the verification is complete, click Ok.
Polling occurs in 30 second intervals, or whenever a Tenor DX trap is received.
Set up Debug Message Display window
The following explains how to display debug messages that are generated by the quintum.exe. This window is
used to troubleshoot HPOV processing events for the Tenor DX icons.
1. From the HP Openview desktop, right-click on the desired Tenor DX unit icon and select Object Proper-
ties.
2. From the Attributes window, select Quintum Tenor DX .