AGI Security SYS-16A901 User Manual - Manual (Page 83)

APPENDIX 10 DVD WRITER INSTALLATION
77
APPENDIX 10 DVD WRITER INSTALLATION
Model 1 allows users to install a DVD writer by themselves.
The supported DVD writer models are as follows. Please use only the suggested DVD writer models to ensure the
compatibility.
Type Brand Model
SATA Liteon iHAS120
SONY
AD-7240S
Note: Before installing the DVD writer, make sure your DVR is powered off and your DVR supports this
feature.
Step1: Remove the DVR cover, and find the DVD writer bracket to remove it.
Step2: Put the DVD writer in the bracket, and fix it to the bracket with two screws (optional) on each side.
Step3: Find the sata and power cables on the DVR main board:
- Sata cable: Use only the cable plugged into the jack of SATA5 on the main board.
- Power cable: Use only the cable plugged into the black jack as shown below.
Step4: Connect the sata and power cables to your DVD writer.
Step5: Replace the bracket to the DVR base and fix it.