AGI Security SYS-16A901 User Manual - Manual (Page 35)

MAIN MENU
29
5.4 ADVANCED CONFIG
5.4.1 CAMERA
ADVANCED CONFIG
CAMERA CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11  
DETECTION BRIGHTNESS 128
ALERT CONTRAST 128
NETWORK SATURATION 128
DISPLAY HUE 128
RECORD COV. OFF
DEVICES REC ON
DCCS CHANNEL TITLE CH1
IVS
NOTIFY
EXIT
1) BRIGHTNESS / CONTRAST / SATURATION / HUE
Click the current value to manually adjust the brightness/contrast/saturation/hue of each channel here. .
2) COV.
Select if you want to mask the selected channel under recording (ON / OFF). When this function is activated,
the wording “
COV. ” will be shown on the channel screen.
Note: To hide the wording “COV.” When this function is on, go to “DISPLAY”, and set “DISPLAY COVERT”
to “OFF”. For details, please refer to “5.4.5 DISPLAY” at page 34.
3) REC
Select if you want to enable recording for the selected channel (ON / OFF).
Note: When this function is disabled, no manual, event or timer recording will be activated even if any
of these three record functions is set to “ON”.
4) CHANNEL TITLE
Click the channel title column to change the channel title (up to 12 characters). The default title is the
channel number.
5.4.2 DETECTION
ADVANCED CONFIG
CAMERA CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11  
DETECTION LS 07
ALERT SS 03
NETWORK TS 02
DISPLAY MOTION OFF
RECORD ALARM OFF
DEVICES AREA EDIT
DCCS
IVS
NOTIFY
EXIT
1) LS (Level of Sensitivity)
“LS” is to set the sensitivity of comparing two different images. The smaller the value is, the higher sensitivity
for motion detection. The highest sensitivity setting is 00, and the lowest sensitivity setting is 15. The default
value is 07.