AGI Security SYS-16A901 User Manual - Manual (Page 49)

MAIN MENU
43
Note: For details about DVR operations from your mobile device, please visit
http://www.eagleeyescctv.com .
2) ALARM TYPE
Select the external alarm type to “ALARM NO.” or “ALARM N.C.”
For CH01, there’s one more option of “INTERNAL ALARM”. This option should be selected only when the
camera connected to CH1 is a human detection camera.
3) CH1 ~ 4
Enter the text you want to see when your iPhone, iPad or Android mobile device receives Push Video. The
default text is the channel number.
PUSH MESSAGE
Note: This function is for selected models only.
Before using this function, make sure:
 You have iPhone, iPad, or Android mobile phone or tablet.
 You have subscribed the mobile network service from your mobile service provider.
 The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “APPENDIX 4 MOBILE SURVEILLANCE
VIA EAGLEEYES” at page 68.
 You have configured EagleEyes to access this DVR, and Push Video is enabled. For details, please refer to “APPENDIX 5 SET
PUSH VIDEO” at page 70.
You’ll get a text message telling you the occurrence of selected system event(s).
ADVANCED CONFIG
CANERA PUSH VIDEO PUSH MESSAGE MESSAGE MAIL VIDEO MAIL
DETECTION ACTION ON
ALERT EVENT  ALL
NETWORK
 VIDEO LOSS
DISPLAY
 HDD FULL
RECORD
 POWER ON
DEVICES
 CLEAR HDD
DCCS
 NET LOGIN
IVS
 KEY UNLOCK
NOTIFY
 NETWORK
 UPS
 SYSTEM ABNORMAL
EXIT
Step1: Switch “ACTION” to “ON”.
Step2: Select the system event(s) you want to get notified via your mobile device.
Step3: Enable “Push Message” in EagleEyes on your mobile device, and try to trigger an alarm event to see if
you’ll get Push Message.