Interlogix KTD-405 Series User Manual - Manual (Page 37)

Chapter 3
Programming
33
11. The annunciation menu (Figure 48) is for
future use. When annunciation is enabled,
the keypad displays the first, second, and
third call-in/alarm on thee LCD and stores up
to 32 call-in requests.
Figure 48. Annunciation menu
12. Pressing + and then displays the call tone
menu (Figure 49). In annunciation mode,
the keypad produces a tone on a call-in
request or alarm. This sound can be set to
one frequency (single) or to warble between
two frequencies (multiple).
Figure 49. Call tone menu
13. When a spot monitor number is assigned
(Figure 50), pressing the 1st key displays the
first site number in the annunciation queue
on the spot monitor, and the keypad
automatically addresses control to that
monitor.
Figure 50. SPOT MONITOR NUMBER menu
ANNUNCIATION?
NO
CALL TONE TYPE?
MULTIPLE
SPOT MONITOR
NUMBER: 0