AltiGen MAXCS 7.0 Update 1 MultiVOIP Configuration - Manual (Page 7)

MAXCS 7.0 Update 1MultiVoIP Configuration Guide Page 7 of 27
3. Add a new codec profile named MVP Gateway. Set the following parameters:
• Set Codec to Prefer G.723.1 support G.729 (the codec between MaxCS and the MultiVoIP
Gateway, in this example, is G.723)
• Set both DTMF Delivery and SIP Early Media to Default
4. Select Enterprise Manager > IP Dialing Table.
5. Add an entry (Server ID is 1 in this example) with the following parameters:
• Set Server Name to MVP Gateway
• Set Sever IP Address to 10.10.101.81
• Set Dialing Scheme to Enblock.
• Set Protocol to SIP.
• Set Codec to MVP Gateway.